I’m moving to a new home. It’s not exactly ritual, but it’s not in a subdivision either.
Rogers live chat confirmed service was available 3 doors down from my new house, and when I peek in the service box directly in front of my home, I see coax cable already there.
However, when calling customer service and talking to a live chat person, they all sound confused as to why there isn’t service at my home.
I think it’s just because the previous (original) owners did not use cable and as a result, it was never brought Right up to my house.
Does anyone have any tips, contacts, or ideas about how I can convince Rogers that I am indeed serviceable?
I’m brand new to this and appreciate any help at all.
↧
[Internet] What do I say to Rogers?
↧
[Modem/Router] Rogers Wall-to-Wall Wi-Fi
https://www.rogers.com/consumer/internet/mesh-whole-home-wifi-network
any opinions on this? has anyone used it and does it work well?
↧
↧
[Internet] Youtube lagging/buffering for the past 1 month! VERY ANNOYING!
Hi,
Youtube has been lagging and buffering non stop on my rogers internet for over a month now. It has become very annoying and irritating.
I have Rogers 1gbps internet, and the speedtest on rogers website show full speed, but its only when watching Youtube that this problem occurs.
This problem is limited to Youtube only. It is not related to a specific machine/browser/addons/etc.
I have tried to use a VPN, and youtube works perfectly on that with no issues. So it is definitely Rogers internet fault.
I have also tried different DNS to see if that would solve the issue, but it does not.
How can I escalate this issue to Rogers technical support? As I feel their customer service might just give me the run around.
Any of you have any suggestions on how I can fix this on my end without using a VPN?
Thank you.
↧
[Internet] CODA Modem Constant Resync
I'm in the beta firmware program however had this issue even before opting in on the beta program. The modem, mostly in the evening the modem would drop sync and constant resync. Any issues with my signal?
DOCSIS LogsThe DOCSIS event logs is shown here No. Time Type Priority Event1 01/01/1970 00:00:09 90000000 warning MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1;CM-MAC=[MAC ADDRESS];CMTS-MAC=[MAC ADDRESS];CM-QOS=1.1;CM-VER=3.1;2 01/01/1970 00:00:13 68000401 warning ToD request sent - No Response received;CM-MAC=[MAC ADDRESS];CMTS-MAC=[MAC ADDRESS];CM-QOS=1.1;CM-VER=3.1;3 01/01/1970 00:00:34 82000200 critical No Ranging Response received - T3 time-out;CM-MAC=[MAC ADDRESS];CMTS-MAC=[MAC ADDRESS];CM-QOS=1.1;CM-VER=3.1;4 01/01/1970 00:00:34 82000300 critical Ranging Request Retries exhausted;CM-MAC=[MAC ADDRESS];CMTS-MAC=[MAC ADDRESS];CM-QOS=1.1;CM-VER=3.1;5 01/01/1970 00:00:34 82000600 critical Unicast Maintenance Ranging attempted - No response - Retries exhausted;CM-MAC=[MAC ADDRESS];CMTS-MAC=[MAC ADDRESS];CM-QOS=1.1;CM-VER=3.1;6 01/01/1970 00:00:37 82000200 critical No Ranging Response received - T3 time-out;CM-MAC=[MAC ADDRESS];CMTS-MAC=[MAC ADDRESS];CM-QOS=1.1;CM-VER=3.1;7 01/01/1970 00:00:38 82000300 critical Ranging Request Retries exhausted;CM-MAC=[MAC ADDRESS];CMTS-MAC=[MAC ADDRESS];CM-QOS=1.1;CM-VER=3.1;8 01/01/1970 00:00:38 82000600 critical Unicast Maintenance Ranging attempted - No response - Retries exhausted;CM-MAC=[MAC ADDRESS];CMTS-MAC=[MAC ADDRESS];CM-QOS=1.1;CM-VER=3.1;9 01/01/1970 00:00:38 82000300 critical Ranging Request Retries exhausted;CM-MAC=[MAC ADDRESS];CMTS-MAC=[MAC ADDRESS];CM-QOS=1.1;CM-VER=3.1;10 01/01/1970 00:00:38 82000600 critical Unicast Maintenance Ranging attempted - No response - Retries exhausted;CM-MAC=[MAC ADDRESS];CMTS-MAC=[MAC ADDRESS];CM-QOS=1.1;CM-VER=3.1;11 01/01/1970 00:00:39 68000403 error ToD request sent- No Response received;CM-MAC=[MAC ADDRESS];CMTS-MAC=[MAC ADDRESS];CM-QOS=1.1;CM-VER=3.1;12 01/01/1970 00:00:56 82000200 critical No Ranging Response received - T3 time-out;CM-MAC=[MAC ADDRESS];CMTS-MAC=[MAC ADDRESS];CM-QOS=1.1;CM-VER=3.1;13 07/05/2018 01:40:28 90000000 warning MIMO Event MIMO: Stored MIMO=-1 post cfg file MIMO=-1;CM-MAC=[MAC ADDRESS];CMTS-MAC=[MAC ADDRESS];CM-QOS=1.1;CM-VER=3.1;14 07/05/2018 01:41:47 82000200 critical No Ranging Response received - T3 time-out;CM-MAC=[MAC ADDRESS];CMTS-MAC=[MAC ADDRESS];CM-QOS=1.1;CM-VER=3.1;15 07/05/2018 01:41:48 82000300 critical Ranging Request Retries exhausted;CM-MAC=[MAC ADDRESS];CMTS-MAC=[MAC ADDRESS];CM-QOS=1.1;CM-VER=3.1;16 07/05/2018 01:41:48 82000600 critical Unicast Maintenance Ranging attempted - No response - Retries exhausted;CM-MAC=[MAC ADDRESS];CMTS-MAC=[MAC ADDRESS];CM-QOS=1.1;CM-VER=3.1;17 07/05/2018 01:41:48 82000200 critical No Ranging Response received - T3 time-out;CM-MAC=[MAC ADDRESS];CMTS-MAC=[MAC ADDRESS];CM-QOS=1.1;CM-VER=3.1;18 07/05/2018 01:41:49 82000300 critical Ranging Request Retries exhausted;CM-MAC=[MAC ADDRESS];CMTS-MAC=[MAC ADDRESS];CM-QOS=1.1;CM-VER=3.1;19 07/05/2018 01:41:49 82000600 critical Unicast Maintenance Ranging attempted - No response - Retries exhausted;CM-MAC=[MAC ADDRESS];CMTS-MAC=[MAC ADDRESS];CM-QOS=1.1;CM-VER=3.1;20 07/05/2018 01:43:19 82000400 critical Received Response to Broadcast Maintenance Request, But no Unicast Maintenance opportunities received - T4 time out;CM-MAC=[MAC ADDRESS];CMTS-MAC=[MAC ADDRESS];CM-QOS=1.1;CM-VER=3.1;
Downstream OverviewPort ID Frequency (MHz) Modulation Signal strength (dBmV) Channel ID Signal noise ratio (dB)1 645000000 256QAM -3.200 15 38.9832 849000000 256QAM -9.800 2 34.3463 855000000 256QAM -10.100 3 33.9574 861000000 256QAM -9.900 4 34.3465 579000000 256QAM -3.300 5 38.6056 585000000 256QAM -4.000 6 37.6367 591000000 256QAM -4.400 7 37.6368 597000000 256QAM -4.100 8 38.6059 603000000 256QAM -4.000 9 37.63610 609000000 256QAM -3.700 10 38.60511 615000000 256QAM -2.900 11 38.98312 621000000 256QAM -2.800 12 38.60513 633000000 256QAM -3.300 13 38.60514 639000000 256QAM -3.400 14 38.60515 303000000 256QAM -6.600 1 36.38716 651000000 256QAM -3.000 16 38.60517 657000000 256QAM -3.000 17 38.98318 663000000 256QAM -2.900 18 38.60519 669000000 256QAM -2.800 19 38.98320 675000000 256QAM -3.500 20 38.98321 681000000 256QAM -3.700 21 38.60522 687000000 256QAM -3.800 22 38.60523 693000000 256QAM -3.500 23 38.60524 699000000 256QAM -3.200 24 38.60525 705000000 256QAM -3.200 25 38.60526 711000000 256QAM -3.100 26 38.98327 717000000 256QAM -4.000 27 37.35628 723000000 256QAM -4.900 28 37.35629 825000000 256QAM -7.200 29 35.78030 831000000 256QAM -8.000 30 35.08431 837000000 256QAM -8.900 31 34.48432 843000000 256QAM -9.200 32 34.484OFDM Downstream OverviewReceiver FFT type Subcarr 0 Frequency(MHz) PLC locked NCP locked MDC1 locked PLC power(dBmv)0 NA NA NO NO NO NA1 4K 275600000 YES YES YES -4.799999Upstream OverviewPort ID Frequency (MHz) Modulation Signal strength (dBmV) Channel ID Bandwidth1 30596000 ATDMA - 64QAM 43.000 1 64000002 38596000 ATDMA - 64QAM 53.000 3 32000003 23700000 ATDMA - 64QAM 43.000 2 6400000OFDM/OFDMA OverviewChannel Index State lin Digital Att Digital Att BW (sc's*fft) Report Power Report Power1_6 FFT Size0 DISABLED 0.5000 0.0000 0.0000 -inf -1.0000 4K1 DISABLED 0.5000 0.0000 0.0000 -inf -1.0000 4K
↧
Cable self run.
What kind of FTTx Rogers is?
Does it real FTTHouse?
Bell gigabit always FTTH(Home)
When I living in apartment it wasn't FTTAppartment, it was FTTB with RG-6 from Rogers box on building wall to apparment.
Why I asking.
I live in house where only Bell 5mbps available, new houses built on the end of my backyard, distance to neighbor 100m.
Bell gigabit available per address, Rogers per postal code.
Rogers and Bell refuse to install.
I have box of 500 ft unused cable, it's RG-6 Quad Shield, approved for 3 GHz. I can run it there.
Houses finished outside, land is sand. I found this houses on realtor listed 2.4 - 3 millions.
After contractors install fence I can put cable on ground near fence. But what next?
How to tell Rogers to connect cable at one street and install on another?
Rogers and Bell refuse to install cause attaching cable to trees or just dig into ground not their way.
Bell better, lower ping, SPF adaptor inside modem can be plugged into your router.
RG-6 pulling strenght 20kg
Practically hard to break by hands. Easy to connect 2 cables.
↧
↧
[Internet] Have you switched from Bell?
Hi,
I just wanted to check if anyone has switched from Bell to Rogers. Currently, I have Bell 1Gbps. Although it varies, the advertised speeds are 1Gbps download and up to 940 Mbps upload. I do get pretty high upload.
Rogers is offering 1Gbps download but it says on 30 Mbps upload. The Rogers rep continues to say they use Bell Fiber and it's FTTH and not Cable. I'm not too sure about that.
Is rogers supposed to be better or equivalent to Bell? I thought Bell Fiber is miles ahead of Rogers but wanted some thoughts as well.
↧
New Remotes
Went into Rogers store after my old remote for the old SA PVR decided that it was going to respond very slowly to button pushes. They instantly swapped it for a new style remote.
It's terrible.
The settings button (Shift Menu ... which you can't seem to do) doesn't go into cable box settings. You have to use the buttons on the box.
Menu us the same as Guide.
The exit button does NOTHING when in Guide or Info
The page up/down buttons to scroll quicker through the guide, are tiny and awkwardly placed and definitely too close together.
Many other nuisance things about them.
Is there any way to get the old style remote?
↧
[Internet] Streaming on twitch
Been streaming on twitch for a while but can't keep it up consistently due to Rogers "30mb" upload.
Have the gigabit package.
On CODA modem with 35T1.
Have switched modem, bought a new router. Called in tech support multiple times, they always come and just do speed tests and leave. Speeds sometime show fine but it's never consistent. Might go up to 30mb upload and drop down to 1-5mb upload.
Had a senior tech on the case and was told he's tracking down the issue, that was around 2 months ago. Never had a response after that.
Been messaging them on twitter constantly and calling.
It's always the same thing, unplug the router so we can test your modem. At the end, "we don't see any issues so we can't open up a ticket"
Downstream Overview
Port ID Frequency (MHz) Modulation Signal strength (dBmV) Channel ID Signal noise ratio (dB)
1 645000000 256QAM 1.200 15 40.946
2 849000000 256QAM -1.800 2 38.983
3 855000000 256QAM -2.600 3 38.605
4 861000000 256QAM -2.900 4 38.605
5 579000000 256QAM 2.500 5 40.946
6 585000000 256QAM 2.700 6 40.366
7 591000000 256QAM 2.700 7 40.946
8 597000000 256QAM 2.800 8 40.946
9 603000000 256QAM 2.800 9 40.366
10 609000000 256QAM 3.100 10 40.366
11 615000000 256QAM 2.800 11 40.946
12 621000000 256QAM 3.100 12 40.946
13 633000000 256QAM 2.800 13 40.946
14 639000000 256QAM 2.200 14 40.946
15 303000000 256QAM 0.600 1 38.605
16 651000000 256QAM 0.500 16 40.366
17 657000000 256QAM 0.900 17 40.366
18 663000000 256QAM 2.000 18 40.946
19 669000000 256QAM 3.100 19 40.946
20 675000000 256QAM 3.700 20 40.946
21 681000000 256QAM 4.000 21 40.946
22 687000000 256QAM 4.200 22 40.366
23 693000000 256QAM 4.700 23 40.946
24 699000000 256QAM 4.500 24 40.946
25 705000000 256QAM 4.500 25 40.946
26 711000000 256QAM 3.800 26 40.366
27 717000000 256QAM 3.500 27 40.946
28 723000000 256QAM 2.900 28 40.366
29 825000000 256QAM -1.900 29 38.605
30 831000000 256QAM -1.400 30 38.983
31 837000000 256QAM -1.300 31 38.983
32 843000000 256QAM -1.700 32 38.605
Upstream Overview
Port ID Frequency (MHz) Modulation Signal strength (dBmV) Channel ID Bandwidth
1 38596000 ATDMA - 64QAM 44.250 3 3200000
2 30596000 ATDMA - 64QAM 41.500 1 6400000
3 23700000 ATDMA - 64QAM 42.000 2 6400000
Don't have Bell Fibre in my area so I'm limited to 10mb upload from Bell.
Have tried Start.ca and it's still the same thing. It was fine for 2-3 weeks and by the end of the first month same issues started to show up, tried to get it fixed but no luck so I back to Rogers cause the download was slow with Start.ca.
Have attached some speedtests results even tho it won't make a difference.
A stream test when it lags and on some days when I can do 8+ hrs stream without any issues.
I wanna know what are my options other than moving to a place with better internet. Just can't quit doing this :(
↧
[Internet] Rogers 500D/20U Package
Hi everyone, I looked at some previous posts, and will hopefully provide a descriptive summary of the issue.
I live in Pickering, specifically near Major Oaks and Brock Rd.
I have the 500/20 Rogers package.
Been having issues with slow speeds/ degraded performance in streaming/ latency issues/disconnects in games.
Rogers CODA 4582 Modem.
Work Already Completed:
1) Replaced the line coming from the street to my home.
2) Replaced home cables from R59 to R6 cable.
3) Tech provided amplifier, and then removed amplifier.
4) Attempted to use the modem both in regular and bridged mode.
Unfortunately the issue persists.
I'm looking for next steps.
Here are the current signal levels.
Downstream Overview
Port ID Frequency (MHz) Modulation Signal strength (dBmV) Channel ID Signal noise ratio (dB)
1 633000000 256QAM 1.600 13 38.605
2 849000000 256QAM -3.100 2 37.636
3 855000000 256QAM -2.900 3 37.636
4 861000000 256QAM -3.600 4 37.636
5 579000000 256QAM 2.500 5 38.983
6 585000000 256QAM 2.600 6 38.983
7 591000000 256QAM 2.900 7 38.983
8 597000000 256QAM 2.800 8 38.605
9 603000000 256QAM 2.800 9 38.605
10 609000000 256QAM 2.800 10 38.605
11 615000000 256QAM 3.100 11 38.983
12 621000000 256QAM 2.400 12 38.605
13 303000000 256QAM 6.900 1 38.983
14 639000000 256QAM 1.700 14 38.605
15 645000000 256QAM 1.400 15 38.605
16 651000000 256QAM 1.300 16 38.605
17 657000000 256QAM 1.200 17 38.983
18 663000000 256QAM 1.100 18 38.605
19 669000000 256QAM 1.100 19 38.983
20 675000000 256QAM 0.800 20 38.605
21 681000000 256QAM 1.100 21 38.983
22 687000000 256QAM 0.500 22 38.983
23 693000000 256QAM 0.400 23 38.983
24 699000000 256QAM 0.500 24 38.605
25 705000000 256QAM 0.500 25 38.605
26 711000000 256QAM 0.700 26 38.605
27 717000000 256QAM 0.200 27 38.605
28 723000000 256QAM 0.500 28 38.983
29 825000000 256QAM -2.500 29 37.636
30 831000000 256QAM -2.700 30 37.356
31 837000000 256QAM -2.600 31 38.605
32 843000000 256QAM -3.000 32 37.636
OFDM Downstream Overview
Receiver FFT type Subcarr 0 Frequency(MHz) PLC locked NCP locked MDC1 locked PLC power(dBmv)
0 NA NA NO NO NO NA
1 4K 290600000 YES YES YES 5.500000
Upstream Overview
Port ID Frequency (MHz) Modulation Signal strength (dBmV) Channel ID Bandwidth
1 38596000 ATDMA - 64QAM 32.500 3 3200000
2 30596000 ATDMA - 64QAM 28.000 1 6400000
3 23700000 ATDMA - 64QAM 27.250 2 6400000
OFDM/OFDMA Overview
Channel Index State lin Digital Att Digital Att BW (sc's*fft) Report Power Report Power1_6 FFT Size
0 DISABLED 0.5000 0.0000 0.0000 -inf -1.0000 4K
1 DISABLED 0.5000 0.0000 0.0000 -inf -1.0000 4K
Thank you for your time.
↧
↧
[TV] Everyone at Rouge Valley Retirement Home is missing channels
About 2 or 3 dozen channels are missing for "ALL" the residents of Rouge Valley zip code L3P 8N1
"This channel is currently not available please try again later"
Work was done around 2:00am today by Rogers everything went off and when everything came back on this happened.
↧
[TV] Re: Just got Rogers Select TV Package/HD Nex box
So against my better judgement, finally pulled the trigger on calling Loyalty & switching from Basic Cable with the DTA adapter to;
Rogers Select channel package with an HD/Nex box.
What I am *trying* to find or asking assistance in is a brief channel line up/listing that includes:
*Which* channels are in the Select package AND the channel #'s(preferably for London, ON) that coincide with those channels.
So far I've found:
https://www.rogers.com/cms/rogers/page-specific/tv/channels/pdf/Channel-List-ON-ALL-EN_NTV.pdf
http://channelguides.ca/rogers.php?Location=London&Package=Starter&Type=HD
So the first is good but does not have the Channel #'s, the 2nd link...I am NOT confident it is up to date.
So any positive/helpful feedback would be greatly appreciated in this regard. Please & thanks!
↧
[Modem/Router] cable modem remote access via its dynamic IP
Can I access modems CGN3 and CGNM-3552 remotely, via their dynamic public IP?
Which port to use?
↧
[Modem/Router] Use another router instead of the CODA?
Are there any benefits to using my Asus AC-3200 router for my wireless and such instead of the CODA-4582?
↧
↧
[Modem/Router] Rogers CODA-4582 modem now available Puma 7 Chipset
Should be available to all 250u and gigabit customers. IPV6 is not enabled yet and wont be until January or so Dave says.
http://communityforums.rogers.com/t5/forums/forumtopicpage/board-id/Getting_connected/message-id/37931#M37931
↧
Rogers not "counting" google downloads?
I'm restoring from my google drive backups and have downloaded ~2TB It's been a few days and my usage is reported as well below that online.
Do they not count peered data?
↧
[Internet] Rogers RocketHub Change DNS
I want to configure my RocketHub to use OpenDNS but there does not seem to be any place to change it. When I look at where nslookup is pointing, it's set to Port 53 of the hub.
Can the DNS be changed?
Thanks
↧
Rogers billing with retentions is 'still' two faced!
I'm sure this is common knowledge to a lot of people but just wanted to share my experience with Rogers and their customer relations department in 'negotiating' a better internet deal.
Last October I changed packages with them. To 150u package for $60+tax. Here are two quotes from our chat last year and where they described and summarized the offering:
02:48:11 PM [Tallia ] Thank you for your patience XXXXX. As I mentioned I reached out to my support team and we are able to offer you our Ignite 150u for $60+tax = $67.80 for the next 12 months. Now I know you are being offered $50 for unlimited usage but this would be our absolute best offer. How does that sound?
03:01:16 PM [Tallia ] Perfect!
Just to recap, here's what we've done today:
-started a new Internet offer with ignite 150u for $60+tax monthly for the next 12 months.
Fast forward to this weekend, and I of course noticed that they raised the price a few months back on me (auto billing, I was forgetting to check the e-bill). I went to chat with them again, and I got the company line from them that was on the bill about the notice, when I questioned that I was clearly promised a price, and no one said 'it's discounted by $40/month off whatever the price is we are charging at that time', we had a little back and forth and they credited me the difference from the last few months, and set up credits for the next few months.
I kind of had a feeling it was discount guaranteed, so I should have kept an eye, but those lines are pretty clear they are stating the final monthly price.
Now get this. In the chat today, after apologizing for the miscommunication, they do the exact same thing again.
(from today):
11:40:00 AM [Lav] You're welcome, I can also see that this promotion of you's is ending October of this year in 2 months, If you would like I am able to add the same discounted promotion (67.79 taxes in) for 12 months starting today. This way you can have the same reduced cost for additional 12 months rather than getting back to the normal price. I want to make sure you feel good after this chat.
Notice they use the words discounted promotion, but again, only mention the final price, and state for 12 months. How is anyone supposed to extrapolate from that, that it's only promising the discount again and not the price, even though they only talk about the price. Earlier in the chat he did say that future promotions are discount guaranteed, so then why again are they talking about final price 'for 12 months'.
Are they violating anything here? or is this 'acceptable language' for them? I'll probably just end up switching to a third party ISP because of this, tired of what seems like deceptive billing practices from Rogers. I'm glad that they ended up honouring the pricing they originally offered, but we shouldn't have to monitor our bills every month for a price hike when they had told a price.
↧
↧
pfSense with IPv6 on Rogers
Hi all,
I found a post a few days ago with some good information along with a forum member who is a Rogers employee and uses pfSense as well, but I can't find it for the life of my any more (googling "site:dslreports.com rogers ipv6 pfsense" didn't help :/)
I've tinkered with the settings changing the requested prefix from 48 up to 64, as well as trying certain settings on and off. I've gone as far as rebooting the computer each time hoping that would make it start fresh and get the IPv6 address.
So far ONCE I was able to get one assigned to the WAN interface, but while trying to get the LAN interface set up suddenly it stopped working entirely. Now I'm not sure if it's a problem with my setup or Rogers.
Can anyone let me know what the latest settings are to get this to work? I am running pfSense 2.4.3 if that makes a difference.
Thanks!
↧
Any one else having issues getting a second ipv4/6 address?
On a bridged modem as the title states.
On the CODA hardware and firmware trial.
↧
[Internet] Rogers dead download 0mbps, after reboot only works for 10 min
Hi, I am posting it here to see if anyone has ever solved a similar problem. My location: Scarborough M1S.
I have had rogers for years. It worked well until three weeks ago, my internet goes down a lot. It is almost unusable.
The last 5 speed test results are:
0.1/down 71/up (mbps)
377/down 42/up
474/down 78/up
190/down 34/up
0.01/down 31/up
(within 10 minutes, computer connected to router(modem) with cat5e cable directly.)
The download is just dead every a few while. Could be 2 sec or 10 min, it is just randomly that I have no internet connection.
Factory reset, reboot the modem many times. It shoots up to 900Mbps/down sometimes right after the modem reboots, then went bad in a while. The funny thing is, when speed test failed, Ping & MTR works just fine.
While I browse on computer, 80% of the time pages are blank with Chrome loading icon spinning. It loads or fails after a while. 20% of the time page loads instantly. Youtube is on and off, it is good when it transfers; or just stuck loading.
Tried SSH tunneling and VPN to other place, it does not improve anything.
Had two technician visits this week. They replaced some connectors outside the house, and while they were here, Internet worked for 20 min. After they left, later in the afternoon the Internet connection start to fail again. Checking the modem stats, it appears that dBms gets higher. But it does not fix the dead download.
I called rogers to have the 3rd technician visit. But I don't think he will do anything different from the last two guys.
Rogers ignite gigabit internet, CODA 4582u.
System Information
XHardware Version 2ASoftware Version 2.0.10.33T3Gateway Serial Number HFC MAC Address System Time Sun, 05 Aug 2018 00:16:18Time Zone UTC+00:00 Greenwich Mean Time: Dublin, London, LisbonLAN Up Time 000 days 01h:49m:53sWAN IP Address WAN Receiving 13.68G BytesWAN Sending 1.98G BytesPrivate LAN IP Address 192.168.0.1/24LAN Receiving 134.37M BytesLAN Sending 188.92M BytesWAN Up Time 000 days 01h:47m:31s Downstream OverviewPort ID Frequency (MHz) Modulation Signal strength (dBmV) Channel ID Signal noise ratio (dB)1 657000000 256QAM 11.300 17 40.3662 849000000 256QAM 9.500 2 38.9833 855000000 256QAM 9.600 3 38.9834 861000000 256QAM 9.800 4 38.6055 579000000 256QAM 10.300 5 40.3666 585000000 256QAM 11.500 6 40.3667 591000000 256QAM 11.600 7 40.9468 597000000 256QAM 11.900 8 40.3669 603000000 256QAM 13.200 9 40.36610 609000000 256QAM 13.500 10 40.94611 615000000 256QAM 14.000 11 40.94612 621000000 256QAM 13.900 12 40.94613 633000000 256QAM 12.600 13 40.36614 639000000 256QAM 11.200 14 38.98315 645000000 256QAM 10.700 15 38.98316 651000000 256QAM 11.000 16 40.36617 303000000 256QAM 4.200 1 38.60518 663000000 256QAM 10.900 18 40.36619 669000000 256QAM 11.400 19 40.36620 675000000 256QAM 11.400 20 38.98321 681000000 256QAM 13.000 21 40.36622 687000000 256QAM 15.200 22 40.36623 693000000 256QAM 15.200 23 40.36624 699000000 256QAM 15.300 24 40.36625 705000000 256QAM 14.700 25 40.36626 711000000 256QAM 13.200 26 38.98327 717000000 256QAM 13.300 27 40.36628 723000000 256QAM 12.600 28 38.60529 825000000 256QAM 6.400 29 37.35630 831000000 256QAM 6.800 30 37.63631 837000000 256QAM 7.600 31 38.60532 843000000 256QAM 8.300 32 38.605 OFDM Downstream OverviewReceiver FFT type Subcarr 0 Frequency(MHz) PLC locked NCP locked MDC1 locked PLC power(dBmv)0 NA NA NO NO NO NA1 4K 275600000 YES YES YES 3.900002 Upstream OverviewPort ID Frequency (MHz) Modulation Signal strength (dBmV) Channel ID Bandwidth1 38596000 ATDMA - 64QAM 47.750 3 32000002 30596000 ATDMA - 64QAM 44.250 1 64000003 23700000 ATDMA - 64QAM 42.500 2 6400000OFDM/OFDMA OverviewChannel Index State lin Digital Att Digital Att BW (sc's*fft) Report Power Report Power1_6 FFT Size0 DISABLED 0.5000 0.0000 0.0000 -inf -1.0000 4K1 DISABLED 0.5000 0.0000 0.0000 -inf -1.0000 4K
X>ping 8.8.8.8 -t Pinging 8.8.8.8 with 32 bytes of data:Reply from 8.8.8.8: bytes=32 time=7ms TTL=121Reply from 8.8.8.8: bytes=32 time=27ms TTL=121Reply from 8.8.8.8: bytes=32 time=27ms TTL=121Reply from 8.8.8.8: bytes=32 time=27ms TTL=121Reply from 8.8.8.8: bytes=32 time=28ms TTL=121Reply from 8.8.8.8: bytes=32 time=30ms TTL=121Reply from 8.8.8.8: bytes=32 time=9ms TTL=121Reply from 8.8.8.8: bytes=32 time=31ms TTL=121Reply from 8.8.8.8: bytes=32 time=26ms TTL=121Reply from 8.8.8.8: bytes=32 time=12ms TTL=121Reply from 8.8.8.8: bytes=32 time=8ms TTL=121Reply from 8.8.8.8: bytes=32 time=12ms TTL=121Reply from 8.8.8.8: bytes=32 time=11ms TTL=121Reply from 8.8.8.8: bytes=32 time=9ms TTL=121Reply from 8.8.8.8: bytes=32 time=4ms TTL=121Reply from 8.8.8.8: bytes=32 time=27ms TTL=121Reply from 8.8.8.8: bytes=32 time=27ms TTL=121Reply from 8.8.8.8: bytes=32 time=9ms TTL=121Reply from 8.8.8.8: bytes=32 time=15ms TTL=121Reply from 8.8.8.8: bytes=32 time=25ms TTL=121Reply from 8.8.8.8: bytes=32 time=16ms TTL=121Reply from 8.8.8.8: bytes=32 time=15ms TTL=121Reply from 8.8.8.8: bytes=32 time=13ms TTL=121Reply from 8.8.8.8: bytes=32 time=31ms TTL=121Reply from 8.8.8.8: bytes=32 time=17ms TTL=121Reply from 8.8.8.8: bytes=32 time=10ms TTL=121Reply from 8.8.8.8: bytes=32 time=12ms TTL=121Reply from 8.8.8.8: bytes=32 time=12ms TTL=121Reply from 8.8.8.8: bytes=32 time=38ms TTL=121Reply from 8.8.8.8: bytes=32 time=28ms TTL=121Reply from 8.8.8.8: bytes=32 time=27ms TTL=121Reply from 8.8.8.8: bytes=32 time=26ms TTL=121Reply from 8.8.8.8: bytes=32 time=8ms TTL=121Reply from 8.8.8.8: bytes=32 time=7ms TTL=121Reply from 8.8.8.8: bytes=32 time=11ms TTL=121Reply from 8.8.8.8: bytes=32 time=11ms TTL=121Reply from 8.8.8.8: bytes=32 time=8ms TTL=121Reply from 8.8.8.8: bytes=32 time=30ms TTL=121Reply from 8.8.8.8: bytes=32 time=7ms TTL=121Reply from 8.8.8.8: bytes=32 time=10ms TTL=121Reply from 8.8.8.8: bytes=32 time=10ms TTL=121
↧